JUSTSEN Hot Water Boilers

We offer a large range of JUSTSEN Hot Water Boilers to suit individual client needs with regards to capacity, temperature, pressure, fuel, emission standards and automation.

Hot Water Boiler type JUE-FVB

Capacity up to 15 MW. Ideal for fresh wood chips or energy crops with a high moisture content. Designed with a high degree of automation for extended intervals between stops for manual cleaning.

Specification
Capacity: 3.2 – 15.0 MWFuel: Wet wood chips
Pressure classes: 6.0 / 7.0 / 9.0 / 10.0 / 16.0 bar(g)Flow temperature: 115 – 180 ⁰C
Grate: Water-cooled – counter-currentRadiation part: 2 horizontal flue gas passes
Convection part: 3-4 vertical flue gas tube passesEconomizer: Built-in with internal bypass

The JUE-FVB boilers have been installed in several district heating plants around the world. The rectangular and counter-current design of the grate and combustion chamber is ideal for wet wood chips with up to 60% moisture based on the total weight. As standard the boilers are equipped with combustion air preheating, ash riddling system, compressed air cleaning for boiler tubes, stainless steel reinforcements in the ignition zone and ceramic tiles. To allow a wider range of fuel moisture, typically 20-60% moisture, the boilers can be equipped with flue gas recirculation to cool down the combustion when the boilers are operating in the lower end of the fuel moisture spectrum.

Hot Water Boiler type JUE-GVB

Capacity up to 20 MW. Ideal for all types of biomass fuels. Designed with a high degree of automation for extended intervals between stops for manual cleaning.

Specification
Capacity: 3.0 – 20.0 MWFuel: All types of biomass
Pressure classes: 6.0 / 7.0 / 9.0 / 10.0 / 16.0 bar(g)Flow temperature: 115 – 180 ⁰C
Grate: Water-cooled – cross-flowRadiation part: 2 vertical flue gas passes
Convection part: 3-4 vertical flue gas tube passesEconomizer: Built-in with internal bypass

The JUE-GVB boilers have been installed in several district heating plants around the world. The upright radiation part with addition of secondary combustion air through fins in the water tube constriction is ideal for volatile or dry biomass based fuels. As standard the boilers are equipped with, ash riddling system, compressed air cleaning for boiler tubes, stainless steel reinforcements in the ignition zone. To allow a wider range of fuel moisture, the boilers can be equipped with ceramic tiles and combustion air preheating to increase the allowable fuel moisture, as well as flue gas recirculation to cool down the combustion when the boilers are operating in the lower end of the fuel moisture spectrum.

Hot Water Boiler type JUE-TDC-F

Capacity up to 30 MW. Designed for versatility as the combustion system can be adapted for all types of biomass fuels. The boiler consists of a separate grate/radiation section, horizontal convection part and vertical flue gas economizer. The boiler is available in both high pressure hot water and saturated steam versions.

Specification
Capacity: 5.0 – 30.0 MWFuel: All types of biomass
Pressure classes: 8.0 / 12.0 / 16.0 / 19.5 / 21.0 bar(g)Flow temperature: 115 – 190 ⁰C
Grate: Water-cooled – counter-currentRadiation part: Horizontal flue gas pass
Convection part: 3 horizontal flue gas passesEconomizer: External 2-pass

The JUE-TDC-F boilers have been installed several in large scale industrial facilities around the world. The counter-current design of the grate and combustion chamber is ideal for wet wood chips with up to 55% moisture based on the total weight. As standard the boilers are equipped with ash riddling system, compressed air cleaning for boiler tubes and ceramic tiles. To allow a wider range of fuel moisture, the boilers can be equipped with combustion air preheating increase the allowable fuel moisture and flue gas recirculation to cool down the combustion when the boilers are operating in the lower end of the fuel moisture spectrum.

Hot Water Boiler type JUE-HHF

Capacity up to 10 MW. Designed for versatility as the combustion system can be adapted for all types of biomass fuels. The boiler consists of a grate/radiation section with a horizontal convection drum. Vertical flue gas economizer is optional.

Specification
Capacity: 0.5 – 10.0 MWFuel: All types of biomass
Pressure classes: 8.0 / 12.0 / 16.0 / 19.5 / 21.0 bar(g)Flow temperature: 115 – 190 ⁰C
Grate: Water-cooled – counter-currentRadiation part: Horizontal flue gas pass
Convection part: 2 horizontal flue gas tube passesEconomizer: Optional: external 2-pass

The JUE-HHF boilers have been installed several in large scale industrial facilities around the world. The counter-current design of the grate and combustion chamber is ideal for wet wood chips with up to 55% moisture based on the total weight. As standard the boilers are equipped with compressed air cleaning for boiler tubes and ceramic tiles. To allow a wider range of fuel moisture, the boilers can be equipped with combustion air preheating increase the allowable fuel moisture and flue gas recirculation to cool down the combustion when the boilers are operating in the lower end of the fuel moisture spectrum. Ash riddling system to remove grate fall-through is optional.

Hot Water Boiler type JUE-VHS

Capacity up to 8 MW. Designed for versatility as the combustion system can be adapted for all types of biomass fuels. The boiler consists of a grate/radiation section with a horizontal convection drum. Vertical flue gas economizer is optional.

Specification
Capacity: 0.8 – 8.0 MWFuel: All types of biomass
Pressure classes: 6.0 / 10.0 / 16.0 bar(g)Flow temperature: 115 – 180 ⁰C
Grate: Water-cooled – counter-currentRadiation part: Horizontal flue gas pass
Convection part: 2 horizontal flue gas tube passesEconomizer: Optional: external 2-pass

The JUE-VHS boilers have been installed several in large scale industrial facilities around the world. As standard the boilers are equipped with compressed air cleaning for boiler tubes. To allow a wider range of fuel moisture, the boilers can be equipped with ceramic tiles and combustion air preheating increase the allowable fuel moisture as well as flue gas recirculation to cool down the combustion when the boilers are operating in the lower end of the fuel moisture spectrum. Ash riddling system to remove grate fall-through is optional.

Hot Water Boiler type JUE-MMV

Capacity up to 5 MW. Designed for versatility as the combustion system can be adapted for all types of biomass fuels. The boiler consists of a grate/radiation section with a horizontal convection drum. Built-in horizontal flue gas economizer is optional.

Specification
Capacity: 0.3 – 5.0 MWFuel: All types of biomass
Pressure classes: 4.0 / 6.0 bar(g)Flow temperature: 95 – 140 ⁰C
Grate: Water-cooled – counter-currentRadiation part: Horizontal flue gas pass
Convection part: 2 horizontal flue gas tube passesEconomizer: Optional: built-in 2-pass

The JUE-MMV boilers have been installed all around the world. As standard the boilers are equipped with compressed air cleaning for boiler tubes. To allow a wider range of fuel moisture, the boilers can be equipped with ceramic tiles and combustion air preheating increase the allowable fuel moisture as well as flue gas recirculation to cool down the combustion when the boilers are operating in the lower end of the fuel moisture spectrum. Ash riddling system to remove grate fall-through is optional.

Please see also our ARGUS Hot Water Boilers for high end district heating technology on standardized hot water boilers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Thanks!

    Want to hear more?

    If you want to hear more or if you have any questions about us, we would be happy to contact you by phone or email.



    PhoneE-mail

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.